NF Sunrise Volcano 120mm Remote Cooling
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An alternative to an expensive CPAP cooling
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 92
- Wydruki
- 1
- Wyświetlenia
- 1142
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I bought a Mellow NF Sunrise thinking that it is the coolest extruder/hotend setup for my ender.
Got disappointed when I found out that nobody made a good part cooling for it. So I decided to create my own or in this case modify.
The fan duct was originally from VZBOT though I changed it to make it more compact and redirect the angle because the original one is too steep in my opinion.
Parts Needed:
1. 120x32mm Blower (Voltage according to your printer so that you can control it)
2. Cpap hose with an inner diameter of 21mm
3. Nuts and bolts. I am not sure what I have since it came with the hotend and spare from the printer. sorry.
ONLY PRINT IN ABS/ASA OR ANY HIGH TEMP MATERIAL TO AVOID WARPING.
(any suggestions will always be welcome)
ENJOY! have fun printing.