Spool Skate for Rubbermaid 21 Cup Drybox
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€3.70 – €4.52 net (excluding VAT)
For file: spool-skate-set-rev-c_02mm_petg_4h47m_mk3smmu2s.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.11 excluding VAT (range midpoint).
- Weight reported by the author
- 40 g
- Print time reported by the author
- 4.78 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a spool skate that fits perfectly into the bottom of a Rubbermaid 21 Cup cereal container. Easy assembly.
- Rating
- 4.778 / 5
- Likes
- 135
- Downloads
- 723
- Makes
- 12
- Views
- 4,974
- Reviews
- 18
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
The 21 Cup Rubbermaid containers are getting harder to find and usually more expensive. Here is another great option from the community. https://www.printables.com/model/952313-filament-dry-box-with-rollers
This is a spool skate that fits perfectly into the bottom of a Rubbermaid 21 Cup cereal container. Easy assembly.
Only requires 4x 608 bearings. (No screws or bolts)
Print instructions
I used PETG at .2 mm layer height
3 perimeter walls
10 % infill
You may want brim to help hold the rollers onto the print bed but I didn't need it with the powder coated sheet bed. They are tall and may tip over during a print.
Suggested Items for Rubbermaid 21 Cup Drybox
Hanging Mount for Rubbermaid 21 Cup Drybox
Desiccant for 21 cup rubbermaid container
PC4 - M10 Cap
PTFE Tube Cap
Hanging Buffer Mount
Check out the new desiccant container…
