Just In Case - Customisable Pun Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A customisable version of the small pun box "just in case".
- Rating
- 4 / 5
- Likes
- 50
- Downloads
- 146
- Makes
- 3
- Views
- 905
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A remix of the pun box so you can print the text in a different colour to the box. All parts of the model are split.
Note
When importing into PrusaSlicer, you may see a box that says “Multi-part object detected”. Click “no” to keep the top and bottom of the box in the correct position for the hinge to print in place.
Add a colour change in PrusaSlicer at layer 6 when printing at 0.2mm layer heights for the text. This ensures the plate will match the box colour and that only the text will be a different colour.
A bit of glue to stick the text plate in place is probably a good idea.
Slicing
- 0.2mm Layer Height
- 10% Infill
- No supports