Ender 3 Pro/v2/Max Electronics Tray
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple Electronics tray upgrade for your ender 3's to upgrade your motherboard to while using Voron Printable parts
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 102
- Makes
- 3
- Views
- 2,109
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Test fits grade been highly successful and as it is currently working as designed.
Will be producing a bottom cover that will be attachable for future designs to help hide cable's and object's from entering the compartment
Designed to slide under the Y rail and onto the side 4040's and secured with 2 Low profile T nuts.
Has a channel on top to help avoid ay Linear Rails so you'll have a minor amount of bridging to do for this process.
will use standard Voron Electronic Bay Board setups and will require M2,5x5 screws and M3x5's for securements
- I have left the bottom open for better airflow and to give stock machines more airflow if needed and not limit the space. I can add bottom plate if needed/required
- Uses a variety of Manets and slide in T-slot adapters to add strength to the build
Files associated to the file:
Voron Parts:
https://github.com/VoronDesign/Voron-2/tree/Voron2.4/STLs/Electronics_Bay/Controller_Mounts
Leg Extensions:
https://www.thingiverse.com/thing:4721832
Linear Rail System plus all the Extrusion Systems (Patreon Service):
https://www.patreon.com/squirrelf3d/posts
Y Belt Tensioner:
https://cults3d.com/en/3d-model/tool/leandropuy-2
Materials:
PETG or ABS suggested for print materials
x4 - M2.5x10mm Nuts + Bolts (Motherboard Adapter)
x4 - M3x6 Nuts (Motherboard)
x4 - M3 T-nuts
x6 - M3 8mm Bolts
x8 - 6x3mm Neodymium Magnets
Change LOG:
October 8: uploaded the Beta pieces and should be good to use, the right side compartment has no attachments added to the lid yet but feel free to add your own!
October 9: Added cable channels to front fan sections and minor adjustments to fit and design of the top sections to where they meet the frame.
October 12: Added a mocked up base for the enclosure you shouldn't need to reprint anything other then the Y-Front, and possibly the Front Covers for added magnet holes to the design to attach the bottom pieces with 6x3mm magnets
October 14: Added a slot cover just size the length accordingly it'll just snap into the slots for easy install/removal
Nov 24: Added Y stop pieces for left side attachment's, and the Dual Z belt bottom adaptor