The HoverCrumpet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This a an RC Hovercraft made from foam and 3d printed parts
- Rating
- 0 / 5
- Likes
- 29
- Downloads
- 65
- Makes
- 0
- Views
- 1,234
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a foam/3d printed RC hovercraft. I will include links to all the electronics below. I included the .step files of the skirt and of the foam pieces so that you may take the dimensions and cut them out yourself. I did not purchase the small drone motors however. I will include the .step files for the ducts as you may need to change the design to make it work for your application. This is not a print and play. It will require time however it is fun once it is all made. If you have any questions feel free to ask!
PS! You will notice a design difference between Fan Duct A and Fan Duct B! They are both interchangeable. However the design for Fan Duct B is much stronger and reliable. And it is much easier to modify if necesarry
BLCD 7.2v Motor: (2)
Servo: (1)
Battery + Charger: (1)
https://www.amazon.com/gp/product/B0924MM61Z/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
RC Remote and Reciever: (1)
XT90 Plugs: (2)