XT-60 side mount to panel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you need to mount a XT-60 male connector to a wall or panel this is the model for you!
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 46
- Makes
- 0
- Views
- 346
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is a simple and compact clamp to mount a male XT-60 connector to a wall or panel of your project. This will help you connect and disconnect a battery easily.
The clamp has a retention tab that will prevent the connector from sliding out when plugging or unplugging
The screw holes are meant for M3 screws
Included in the downloads you have the source FreeCAD 0.20 file in case you need to modify the model
For printing you can use 100% infill and 0.20mm layer height. It's small so it will print fast.
If you need to complement your DC plug mount with a DC switch you may be interested in this model:
https://www.printables.com/es/model/291074-dc-toggle-switch-side-mount-panel