Supplement for Testovent 415 flow meter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Supplement to adapt the TESTOVENT 415 flow meter to a 350 mm diameter circular outlet.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 24
- Makes
- 0
- Views
- 383
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution
I don't know if anyone can find this supplement for a Testovent 415 air flow meter (TESTO) useful. It went pretty well for me. If that's the case, I'll leave it here.
4 pieces must be printed and joined with screws. Alternatively they can be joined with adhesive.
In this case, I used PETG because the air outlets I measured were at a certain temperature. If cold air is measured, PLA could be used perfectly.
To improve the tightness of the supplement, it is advisable to add a self-adhesive rubber joint (EVA, neoprene or similar)
Additional material for assembly:
16 screws M3x10 DIN933 (ISO4017)
16 nuts M3 DIN934 (ISO4032)
32 washers M3 DIN125 (ISO7089)