X5SA Y Carriage Upgrade
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Tronyx X5SA have few problems, one of the problem is the Y carriage, The wheels are not completely straight due to…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 21
- Makes
- 0
- Views
- 505
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
The Tronyx X5SA have few problems, one of the problem is the Y carriage, The wheels are not completely straight due to the design, this upgrade make the wheels straight so all 4 wheels touch well the VSLOT.
I have 2 part, one bottom (the main one) and the top, top is not needed but I use it for my custom pulley, so they are in the right height and no need for washer under it.
If you are using the top part you will need m4 x 12mm bolt.
All the rest use the standard bolts.
The bottom part does not need washer where the plastic touch the wheels.
Hope you like it, this resolved issues because not all wheels was touching the VSLOT... and still use the metal piece.
Category: 3D Printer Parts