PI / MKS SKR Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is my custom mount for a MKS SKR 1.3 Board on my Hypercube Evolution. It can also hold a raspberry PI, on which I…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 191
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is my custom mount for a MKS SKR 1.3 Board on my Hypercube Evolution. It can also hold a raspberry PI, on which I run OctoPrint on. The two boards are connected over a direct serial connection via GPIO. I took the step on controll the SKR board only via OctoPrint so no Display is connected.
To cool everything a little I used 120 Fan which I had laying around. But this is optional until the driver handles voltages where they need active cooling.
There are two versions of the mount, since I also installed an optional beeper on the board.
For assembly I used M3 screws and nuts for the SKR and M2 for the PI. The extrusions I mounted the mount are 3030's.
Print Settings
Printer:
Hypercube Evolution
Rafts:
No
Supports:
Yes
Resolution:
0.15
Infill:
20%
Filament:
dasFilament PETG
Black
Notes:
I set support blocker on the screw holes, to save the time to clean them.
Category: 3D Printer Parts