1 / 9
Pixel Watch charger for Pixel Stand (any generation)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
1st generation Pixel Stand clip-on extension for the Pixel Watch charger (for gen 1, 2 and 3).
- Rating
- 4 / 5
- Likes
- 119
- Downloads
- 690
- Makes
- 5
- Views
- 6,572
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
| Date | Description |
| 18/09/2024 | Updated models for gen 2 & 3. Slightly enlarged the ring and the cable groove for an easier fit. |
| 03/01/2024 | Fixed a mix-up in the files. I had not uploaded the right ones for the Pixel Watch 2. |
| 02/01/2024 | Modified the design for a slightly larger cable channel (3mm vs 2.8mm). Added design for the Pixel Watch 2 Added options for the pad to be on the left side of the Pixel Stand. |
| 16/06/2023 | Modified the arm for a better fit of the watch charger, and so it's easier to print. |
This is a 2 piece Pixel Watch charger stand that clips onto the 1st generation Pixel Stand.
I've also designed cable clips for cable management.
It looks best with a bit of clean up and sanding.
Assembly:
- Clip the charging pad into the arm's ring. Make sure the cable fits in the groove.
- Route the cable in the arm's groove, all the way.
- Assemble the arm and the base.
- Route the cable in the base's groove, applying some tension as you do so.
- Clip the base onto the back of the Pixel stand.
- Use the cable clips for cable management.