Button for any size with a sacrificial layer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a button with variable parameters to be made for any size and features: hole size & count, diameter etc..
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 15
- Makes
- 0
- Views
- 100
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Cosplay & Costumes in general
- License
- Creative Commons — Attribution — Noncommercial
This button was made for cosplay of Caroline movie but can be also used for any other purpose, it was made in fusion360 with editable parameters to be downloaded by anyone and to be custom made into any size you wish.
Features:
* Customizable variables in fusion360 .
* There is a very thin “film”/sacrificial layer on the bottom side of the holes to be printed in a straight line to make the bottom part smother.
Sacrificial layer thought idea:
Printing notes:
this file was printed in 0.15 height on 0.4 nozzle, I did not test other configurations but always check the gcode before printing to make sure that the sacrificial layer is indeed being printed.
Different size nozzles might need a tweak in the sacrificial layer height in fusion360
If you share this model link this post too!
Happy printing!
Update 05/02/23: with new Prusaslicer update you can use the ruler to scale the model to any size you wish, sacrificial layer may not work and thickness might needs to be adjasted too (Z of the model).