KUSBA input shaper mount for ender 3 (and others)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
mount a kusba to an ender 3(mostly)
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 347
- Makes
- 1
- Views
- 2,033
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- GNU General Public License v2.0
a nearly universal mount for a KUSBA accelerometer
some times mounting the board hanging off the end is necessary for the usb cable to clear the umbilical
note: the hole pattern is different to the adxl345
uses a screw to clamp to the back plate of the x axis or the bed for y, tested on an ender 3 but could easily work on almost any machine.
no supports required, any infill should work.
id recommend putting something under the screw if your worried about scratches.( will eventually design a boot or jaw to prevent scratching) its best to use at least one heat set insert on the clamping screw as the nut may not always be a perfect press fit depending on your settings
hardware required
1x kusba: https://github.com/xbst/KUSBA
2x m3 x8socket head or button head
1x m3 x20 socket head or button head
3x m3 heat set inserts or hex nuts
optional: 2x m3 flat washers