Semi-airtight cable entry
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.73 – €4.56 net (excluding VAT)
For file: Example - Part A3 and Part B-C_0.15mm_PLA_MINI_4h43m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.14 excluding VAT (range midpoint).
- Weight reported by the author
- 40 g
- Print time reported by the author
- 4.71 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Semi-airtight cable entry for 2 cables for 3D-printer enclosures etc.
- Rating
- 5 / 5
- Likes
- 96
- Downloads
- 198
- Makes
- 1
- Views
- 1,674
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
To make this cable entry, a print "Part B-C" and a print of "Part A" (A1, A2, A3, A4, A5 or A6) must be made. The thickness of the plate in which the cable entry is to be mounted, determines which "Part A" is to be used.
This solution is designed for a seal around the cables with a short piece of backer rod. Other types of soft foam plastic can also be used.
It is designed for a 63mm Hole Saw. If a different size hole saw is used, the print must be scaled. Example: If a 65mm hole saw is used, the print must be made in size 103% (65/63x100=103).
Please note that this solution will not provide a 100% air seal.