Sony E-Mount Wigglegram Lens
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Three slightly different perspectives on the same camera sensor. Animating between them creates a 3D / paralax effect!
- Rating
- 5 / 5
- Likes
- 71
- Downloads
- 428
- Makes
- 3
- Views
- 4,266
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
Example Photos : alexfiel.com/wiggle
After stumbling across some of Kirby Gladstein's photography, I wanted to see if I could recreate the effect with my Sony a6300 mirrorless camera! I used Autodesk Fusion 360 to design the parts and printed out the majority on my Creality CR-10. The lenses themselves were scavenged from used disposable cameras. The camera's small sensor doesn't give me the same width as the Nishika N8000 that Kirby uses, but I got some great depth even with the lenses only ~8mm apart!
Design inspired by similar projects by Joshua Bird and George Moua ✨
Besides 3D printed parts, this model needs three 11mm lenses from disposable cameras and some 5.95mm BB's for the bearing.
Full design / build is on Instructables.