Sony E-Mount Wigglegram Lens
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Three slightly different perspectives on the same camera sensor. Animating between them creates a 3D / paralax effect!
- Ocena
- 5 / 5
- Polubienia
- 71
- Pobrania
- 428
- Wydruki
- 3
- Wyświetlenia
- 4266
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
Example Photos : alexfiel.com/wiggle
After stumbling across some of Kirby Gladstein's photography, I wanted to see if I could recreate the effect with my Sony a6300 mirrorless camera! I used Autodesk Fusion 360 to design the parts and printed out the majority on my Creality CR-10. The lenses themselves were scavenged from used disposable cameras. The camera's small sensor doesn't give me the same width as the Nishika N8000 that Kirby uses, but I got some great depth even with the lenses only ~8mm apart!
Design inspired by similar projects by Joshua Bird and George Moua ✨
Besides 3D printed parts, this model needs three 11mm lenses from disposable cameras and some 5.95mm BB's for the bearing.
Full design / build is on Instructables.