Ghostbusters Leg Hose Quick Disconnect
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.57 – €0.70 net (excluding VAT)
For file: Ghostbusters Hose Plugs.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.64 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 49.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A quick disconnect system for the leg hose on a Ghostbusters uniform.
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 127
- Makes
- 0
- Views
- 844
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Costume Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a quick disconnect system for the GB Fans Leg Hose and Rubber Hose Connector. It consists of three parts: two hose plugs and the back plate. One hose plug is meant to be used with a split key ring for attaching to the uniform belt. The other plug can fit an 8x3mm neodymium magnet that works with the same size magnet in the back plate. The back plate can be sewn on the inside of the uniform to hold it in place. This allows the hose to connect via the magnets, without requiring it to be permanently affixed to the uniform.
The magnets should pressure fit. However, you can also scuff one side with sand paper and use super glue to hold it in place.
I have included the Fusion 360 models for remixes in case anyone needs to adjust the models for different sized magnets, or a different version of the hose connector.