FLSUN ADXL345 SUPPORT
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a probe made for use of the USB trianglelab ADXL345 acelerometer on FLSUN Delta printers.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 72
- Makes
- 1
- Views
- 1,241
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
This is a probe made for use of the USB trianglelab ADXL345 acelerometer on FLSUN Delta printers. The probe was sized to attach similarly to the plate calibration probe supplied with the printer using magnets.
The accelerometer I used has a pre-soldered USB-C interface (or even pins) and is shipped with all the necessary wiring.
Link ADXL345 tianglelab: https://trianglelab.net/products/usb-adxl345
Neodymium magnets can be used for the probe attachment. Specifically, in the photo, 5 cylindrical magnets of 5mm radius and 1mm thickness were used. Other sizes can also be used as long as they do not exceed 2mm in thickness and the dimensions of the housing, which are 20mm x 10mm. Super glue was used to secure them in place.
Four TCEI M2x6 screws were used to attach the accelerometer to the probe.
Printing settings used:
Layer height: 0.02mm
Supports: Yes
Type of media: Tree
Adhesion Support: Brim
Material: PLA+