Bed Crossbar Mount for Rivian
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple bracket that allows you to mount a pair of Rivian crossbars in the truck's bed.
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 123
- Makes
- 1
- Views
- 1,716
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
I have two pairs of crossbars (reasons), and don't like to leave the roof ones on, due to wind noise and efficiency. They are a bit cumbersome and take a decent amount of space in the frunk or gear tunnel, so I decided to create a mount that would allow me to store them out of the way.
This is printed in ASA for UV resistance and at 50% infill for strength. There are certainly improvements possible, but these are plenty strong for the task. I can pull extremely hard on the bottom one without it budging. I have no concern about these holding up.
You will need a couple of longer M6 bolts, as the stock ones are not long enough. Any should do fine. You should probably print a spacer, but for now I just turned the stock cup washers around.