Z-Axis Alignment Endstops, 20 mm extrusion
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Endstops for mechanical Z-axis alignment, attaching to 20 mm aluminum extrusion. 60 mm height.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 36
- Makes
- 0
- Views
- 290
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
I made these for mechanical Z-axis alignment on an SV01 Pro, but they'll work on anything with a 20 mm aluminum extrusion and T-nuts.
There are versions for M3, M4, and M5 screws. Intended screw length is 10-12 mm. You'll need T-nuts (printed or purchased) of the same screw type to install.
Print Recommendations:
PETG, no supports, 0.4 nozzle, 0.2 mm layers, 3 wall lines, 20% Gyroid fill.
At 60 mm tall they may cut a tiny amount of print height, but I don't really consider that usable height anyway due to the way the cables and filament are routed.
