1 / 4
Mounting Bracket for the Articulating Raspberry Pi Camera For the Prusa Original Enclosure
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A bracket for the Prusa Original Enclosure
- Rating
- 5 / 5
- Likes
- 75
- Downloads
- 330
- Makes
- 5
- Views
- 1,473
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Mounting Bracket for the Articulating Raspberry Pi Camera Arm for the Prusa Original Enclosure. I mounted mine at the top-back of my enclosure, which gives a pretty good view. I have included two versions of the mount - vertical and horizontal.
You will need:
2 @ M3 nuts
2 @ M3 8mm bolts
I printed it with:
20% 3D Honeycomb infill
0.3mm Layer Height
No Supports - Flat Side Down