1 / 2
Laser Collimater Jig
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A jig to help with calibrating your laser collimator.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 60
- Makes
- 0
- Views
- 899
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Public Domain
A jig to help with calibrating your laser collimator.
Set your collimator into the jig and pointed at a wall. With a piece of paper taped to the wall mark where the red laser is displayed. While applying slight pressure to the base of the jig, slowly rotate the collimator. The laser should stay relatively centered to the mark on the piece of paper if properly calibrated. If the laser rotates around the mark on the paper adjust the calibration screws on the collimator until there is no or very minimal rotation of the laser on the paper.