1 / 5
Black PSU (MK3S+) replacement frame brace
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement bracket for black PSU when PSU is outside the enclosure
- Rating
- 4 / 5
- Likes
- 13
- Downloads
- 78
- Makes
- 1
- Views
- 765
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Printing time under 6 hours when parameters below are used - achieving the proper stiffness of the bracket.
Printing parameters:
- 0,30mm DRAFT setup for Prusament PETG (PrusaSlicer)
- min. 40% gyroid infill
- min. 8mm Brim inside only
Additional parts to assembly:
- 2x screws M4x18 with low head (max. screw head height 2.7mm is recommended)
- 2x nut M4 with selflocking insert
- 2x washer for M3 screws
If you like / download please don't hesitate to push "like" button.