1 / 4
22mm Handlebar Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed for a speedometer to be mounted to 22mm handlebars.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 96
- Makes
- 0
- Views
- 769
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Mounts designed for 22mm handlebars to hold a speedometer.
Remixed from koubekt on Thingiverse.
Required hardware:
- 4 x M6 hex cap screws x 35mm
- 4 x M6 nuts
You can optionally add rubber strips in between the mount and the handlebar to make a better grip. Hex cap screws designed to embed into the top part, be careful not to tighten the nuts too much!
Print Settings
Layer height: 0.16mm
Infill: ≥ 50%
PETG recommended for greater strength.