LED Yard Stake
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A parametric rectangular LED yard mount for low wattage LED modules with fully configurable size, shroud, and stake…
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 15
- Makes
- 0
- Views
- 282
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
A parametric rectangular LED yard mount for low wattage LED modules with fully configurable size, shroud, and stake parameters. Designed for holiday accent lighting. You'll need to drill holes for wires / water drainage. I didn't include them so people wouldn't have bridging issues. I would recommend printing these in PETG as PLA will warp over time in the sun.
Print Settings
Printer:
Wanhao I3
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
100%
Notes:
Set thickness values to a multiple of your nozzle diameter and wall passes for optimal printing. For example, with a .4mm nozzle and 2 passes per wall, 1.6 works well and creates a solid 4 perimeters for the shroud and stake. You may need to use a brim as well if you have issues with lifting. I would recommend printing these in PETG as PLA will warp over time in the sun.
Wiring and holes for water drainage
Holes for wiring and water drainage were not included as to not cause bridging issues. You'll need to drill them according to your needs.
Category: DIY