360 degree Lithophane holder (3mm)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hello every one. There are several lithophane designs available in thingiverse. So I decided to design a new one which…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 22
- Makes
- 0
- Views
- 256
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Hello every one.
There are several lithophane designs available in thingiverse. So I decided to design a new one which takes less time to print at better quality. This lamp is powered by 5V Mobile charger to glow the lithophane by 1 Watt LED. I thank to All lithophane designs makers in thingiverse. Because I truly inspired and got to know from their works. (Special Thanks to Jaymake)
This one 360 degree lithophane H = 44mm & Dia = 68 mm(Approx)
The complete design is easy to assemble. The components required and parts to be printed as follows
Sl No Parts to be printed Quantity in Nos
1 Top holder 1 no
2 Bottom Holder 1 no
3 Top holder Knob 1 no
4 If required washer to place LED 1 no
5 Lithophane 1 no
Sl No Components Required Quantity in Nos
1 Rocker Switch Small One 1 no
2 LED (1 W or similler) 1 no
3 Resistor 100 Ohm 1 no
4 Micro USB female connector. Panel mounting type 1 no
5 Heat shrink tube 4mm dia Req length
6 Favi stick
7 A mobile charger Micro USB type
Steps to follow:
• Use the attached JPEG as an original for the correct dimensions of the lithophane.
• Change the image to whatever you like (keep the format!)
• Go to http://3dp.rocks/lithophane/
• Upload your image
• Select "Outer Curve"
• Go to settings > Model settings > Maximum size (MM) > Set it to 200 mm
• Go to settings > Model settings > Curve > Set it to 360
• In case you did not upload a negative image: Go to settings > Image settings > positive image
• Click "Model" on top of the page
• Hit "Refresh" button
• Hit "Download" button to download and print your personal lithophane
Printing:
• All the parts not required support to print. The STL file once open in cura split the objects and keep one object at a time and print. Don’t print all the parts at a time which may cause poor quality of prints.
LET ME KNOW, IF YOU MADE ONE ;-)
Print Settings
Printer:
Anet A8
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2 for lethophane
0.3 for all other parts
Infill:
20 - 30%
Category: Household