BONDTECH MK3s MMU2s IR sensor
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.44 – €0.54 net (excluding VAT)
For file: Base / prusa_petg_cover_02mm_37m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.49 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 36.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Modified ir sensor after install BONDTECH extruder upgrade kit with Prusa MK3s and MMU2s.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 76
- Makes
- 0
- Views
- 1,978
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Modified ir sensor after install BONDTECH extruder upgrade kit with Prusa MK3s and MMU2s.
Print instructions
18/05/20 add cap for stock hinge and longer pin.
15/05/20 update Cover.stl file. Sorry for upload wrong file.
Modified IR sensor after install BONDTECH extruder upgrade kit with Prusa MK3s and MMU2s.
Top plate, I use PC4-M10 instead original M5 because I do not have M5 thread insert.
Adjustable sensor pin for easy alignment with shorter M3x10.
(move pin in-out until middle way of "0" as show in display and tight m3x10)
Addition LED indicator insert into connector.
Parts needed: Screw M3x30, M3x10, nut M3, Nyloc nut M3, PC4-M10, small LED, 560ohm resistor