Magnetic Cable Holders. Choose Your GAP!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Organize your cable holders with a choice of gap sizes and number of cables you need to hold. With inserts for magnets.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 87
- Makes
- 0
- Views
- 433
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
Use 10x3 mm magnets and pauze print at the height just before the hole is covered.
I have so many cables with such a diversity of diameters. So I made a collection of cable holders that fits at least my needs.
The side of the cable holder has a flat area so it is easy to align different sizes.
The gap sizes (measured after printing) are: 2.6 mm. 3 mm, 3.5 mm, 3.9 mm, 4.4 mm
I needed the cable holder with the largest gap to hold my keyboard cable (diameter of 5.6 mm) on my desk, as shown in one of the pictures.
Print settings:
No supports
2 or 3 perimeters
4 top 2 bottom layers
0.2 layer height
+10% infill
Using concentric filled for solid layers and top layer gives the best results for the top curves.
For PrusaSlicer or Super Slicer, setting parameter solid_infill_below_area to 35mm² will save filament and printing time.