Shroud for 3.5" (90mm) solar yard light
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement shroud cover for a 3.5" (90mm) solar powered yard light. Held on with an M4x18 screw.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 116
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Public Domain
I lost the shroud on a couple solar yard lights and found Bruce's design simple enough to copy and tweak in Tinkercad. I scaled my version up to 3.5" ID, shortened the shroud length, and added three pegs to secure a protective LED cover that the original shroud held on. I also removed the inner ring groove and added dimples for screw washers.
I recommend PETG since it's going outdoors. Supports are required, and it also needs a screw to hold together. Screw size doesn't really matter, I used an M4x18 because I have a lot lying around.
Took about two hours print on a MK3S+ 0.6mm nozzle, in black Polymaker PETG.