Shroud for 3.5" (90mm) solar yard light
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement shroud cover for a 3.5" (90mm) solar powered yard light. Held on with an M4x18 screw.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Public Domain
I lost the shroud on a couple solar yard lights and found Bruce's design simple enough to copy and tweak in Tinkercad. I scaled my version up to 3.5" ID, shortened the shroud length, and added three pegs to secure a protective LED cover that the original shroud held on. I also removed the inner ring groove and added dimples for screw washers.
I recommend PETG since it's going outdoors. Supports are required, and it also needs a screw to hold together. Screw size doesn't really matter, I used an M4x18 because I have a lot lying around.
Took about two hours print on a MK3S+ 0.6mm nozzle, in black Polymaker PETG.