Raspberry Pi 4 case, 3030 mounted shelf and ssd sleeve for Prusa Mini
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A quite slim Raspberry Pi 4 case, a 3030 extrusion mounted shelf to put it on, and an extrusion mounted SSD sleeve.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 33
- Makes
- 0
- Views
- 475
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A, quite slim, case for the Raspberry Pi 4. To keep it on your Prusa Mini, while still being able to easily remove it, it can rest on this shelf, attached to the 3030 extrusion. In addition, you can put a (KingSpec) SSD, if you happen to use one, in a sleeve, which also is mounted on the extrusion.
Printing should be easy, with default settings. The parts in the pictures are printed with 0.4mm nozzle, 0.2mm layer height with Polyterra Charcoal Black PLA.
Inspired by, among others, the following models:
https://www.printables.com/model/38017-prusa-mini-raspberry-pi-case/comments
https://www.printables.com/model/35475-raspberry-pi4b-prusa-mini-case
https://www.printables.com/model/247274-prusa-mini-raspberry-pi-4-3030-mount