1 / 9
RaspberryPi 3B Case with 30/40mm Fan- Prusa Mk3 Mount — image 1
1 / 9

RaspberryPi 3B Case with 30/40mm Fan- Prusa Mk3 Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€3.72 – €4.55 net (excluding VAT)

For file: RaspberryPi 3 case_0.2mm_PLA_MK3S_4h28m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €4.14 excluding VAT (range midpoint).

Weight reported by the author
45 g
Print time reported by the author
4.46 hr
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

A case to hold a RaspberryPi 3B+ and a 30 or 40mm fan, with optional mounting to a Prusa Mk3 frame

Rating
0 / 5
Likes
6
Downloads
43
Makes
0
Views
439
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial

This is a case to hold the RaspberryPi 3B+ along with a 30mm or 40mm fan, and can be mounted to the Prusa Mk3 frame, or can just sit somewhere.

It has been designed to accommodate the Noctua 40x40mm fan (which is silent compared to other 5v fans), but can take any 40mm or 30mm fan that thickness or smaller.


Fitting

  • Fit the fan to the case (making sure your airflow direction is correct)
    M3 screws for 30mm fans and M4 screws for 40mm fans
  • Fit the big part of the case to the printer frame (using 2x M3 screws)
    There is a passthrough opposite the screw port inside the case to allow you to feed a screwdriver through the case whilst fitting.
  • Place the Pi in the case and screw it, and the small part of the case closed

 


I hope you enjoy printing and using my design. To help me keep designing and uploading more things, you can tip me via 'Buy Me a Coffee' here: https://www.buymeacoffee.com/JoshForwood

Tags