Apple Lightning Connector (Male)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€10.17 – €12.43 net (excluding VAT)
For file: TIME_ESTIMATE_DO_NOT_USE.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €11.30 excluding VAT (range midpoint).
- Weight reported by the author
- 131 g
- Print time reported by the author
- 11.8 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is the male end of a lightning charging cable, meant to be printed very large. Support free!
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 92
- Makes
- 0
- Views
- 795
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial
Do you need to charge your giant iPhone, like the one in my profile? I've got you covered.
Giant. Lightning. Plug.
Continuing my tradition of printing #BigTech, I give you the Apple Lightning charging plug. This is meant to be printed very large, to act as a scale model or display. It is not designed with functionality in mind, though someone far more clever than I could probably make it work for something.
I've included a pre-sized up version of the stl, bringing the model to roughly 700%, while other parts are scaled slightly smaller/slimmer so they should fit together decently.
Glue is required to get the pins to stay in place, unless you just have really incredible tolerance skills.
Printing instructions:
Infill: 20% - 40%
Layer Height: 0.2mm or smaller
No supports for anything
The metal housing at the top contains some very fragile bridges, I recommend printing this in either PLA+ or something more durable like PETG.
This is a modified version of the model originally uploaded by Mark over on GrabCAD. Parts have been split and adjusted slightly for a better print.