Numbered Gravity Spool Holders for MMU2S
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€5.39 – €6.59 net (excluding VAT)
For file: gravity_spoolholder_frame_left_1-v1_02mm_petg_m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.99 excluding VAT (range midpoint).
- Weight reported by the author
- 64 g
- Print time reported by the author
- 6.72 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Added numbers to the sides of the MMU2S Gravity Spoolholders to make it easier to keep track of which spool goes to…
- Rating
- 5 / 5
- Likes
- 40
- Downloads
- 229
- Makes
- 0
- Views
- 4,397
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Added numbers to the sides of the MMU2S Gravity Spoolholders to make it easier to keep track of which spool goes to which filament number.
Print instructions
The original Gravity Spool Holder is an elegant solution to a genuine issue. I have no desire to change it. I have been very careful to mark which filament number I am working with throughout my path though, and thought this little update was worth the effort.
You can print these as one color, or set a height dependent variable to change filament at 4.1 mm. That will get the inner honeycomb and number one color, and the frame another, with only a single filament change. No wipe block needed.
I added the Slicer .3MF files so the correct settings should be included, and all you need to do is select your filament numbers, slice, and export the Gcode.
I intentionally didn't make the number a different color, as these already take too long to print, and the thought of all those additional tool changes just about killed me.
Besides, subtle is better anyway.
Feel free to remix as desired. The font used is Agency FB Bold at 75mm.
Share and enjoy!