"DINish" RPi mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Din mounts for rpi are great as long as there are other devices that can fill out the rail, but a pi din mounted all…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 28
- Makes
- 0
- Views
- 283
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Din mounts for rpi are great as long as there are other devices that can fill out the rail, but a pi din mounted all on it's own takes more work and uses up more mounting real estate. I was faced with such a situation while building my cnc controller box. I decided the best spot for the pi was the top corner, far away from any other DIN mount devices. So I designed this alternative 'dinnish' style pi mount to simplify install and make the footprint on the backplane as small as possible.
It is an easy print; no supports or other tricks required. Since mounting hole spacings for full sized rpi boards have not changed, it will work with any standard pi (rpi1-4). Use 4@ short M3 bolts to secure the pi board to the mount. Then drive 2 self drilling screws (or predrill and drive #8 self tapping screws) through the 2x 4mm diameter holes and in to a flat surface to secure it.
Category: Electronics