1 / 3
Cable wrap for waterpoof 3pin ws2811 light cable — image 1
1 / 3

Cable wrap for waterpoof 3pin ws2811 light cable

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Simple cable wrap to keep two 3pin ws2811 light cables held in place.

Rating
5 / 5
Likes
8
Downloads
36
Makes
1
Views
498
Reviews
1

Updated at source:

Model information

License
Creative Commons — Public Domain

I bought some WS2811 RGB outdoor lights that come with 3pin waterproof barrel plugs. Unfortunately on one of them the end cap was installed backwards so it couldn't be used to screw two plugs together and make a sealed connection. Fixing that would require cutting the cables, turning the bit of plastic 180 degrees and then heat-shrinking the cables back together to make it waterproof. But at that point why bother?

 

This bit of plastic has cutouts for the connectors with tight fit to not let them separate. Just print two pieces, snap it around the closed connectors and then wrap the whole thing with zipties or tape to prevent it from coming apart. (This doesn't need to be waterproof - the connectors have o-ring, this is just to keep them held in position)

 

(I'm sadly not sure what the connector is called)

 

Onshape document: https://cad.onshape.com/documents/49d49fe957a615fd8f49f0b0/w/d436d7d952d9ef7400595dbf/e/b698abd89e26423a03ca5bea?renderMode=0&uiState=637bab6961e8a12053f41572

Tags