1 / 12
Quick swap adjustable monitor stand for 75mm vesa
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made a holder/arm for my wacom cintiq 16.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 53
- Makes
- 0
- Views
- 1,007
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
I made a holder/arm for my wacom cintiq 16.
as this is going to hold a expensive screen and even have the presure of the screen being used at the same time i tried making it as robust as possible, and i figured that the feet would be nice if they were of metal so i use 2x 24cm 8mm chrome rods as the feet.
in order to build this you will need
2x 240mmx8mm rods
6x m5 bolts and nuts
6mm spacers if needed
24x m3 bolts and nuts
2x springs that can go on the opposite side of the adjustment plate so that you only need to push on the bolt to release the lock