RatRig V-Minion CAN bus Umbilical Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
CAN bus umbilical mount for the RatRig V-Minion that attaches to the Z Axis / X Axis joint and the Eva 3 40x28 Fan Duct.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 38
- Makes
- 0
- Views
- 1,342
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Mount a CAN bus umbilical cable from the V-Minion's Z/X Axis joint to the EVA 3 toolhead when using the EVA 3 40x28mm fan inlet.
My setup in the pictures uses a 6mm PTFE tube for the wires but the design allows for other sized cables as well.
The toolhead mount should go between the 40x28 fan and the Eva 3 inlet. Secure the CAN bus cable to the mounts with 4"/100mm zip ties.
Print in PETG, ABS, or PC. I used 5-10 perimeters with a 23% infill and a .3 layer height. Files are prepositioned on the print bed and supports are not required.
Happy Printing!