1 / 2
Garage for toy car - one piece print (+ door) — image 1
1 / 2

Garage for toy car - one piece print (+ door)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Putting together main part and roof was not pretty, so i changed project to be printed as one piece (two with doors).

Rating
5 / 5
Likes
98
Downloads
756
Makes
3
Views
2,963
Reviews
3

Updated at source:

Model information

Category
Vehicles
License
Creative Commons — Public Domain

Putting together main part and roof was not pretty, so i changed project to be printed as one piece (two with doors). 

I putted a hole in the corner of an entrance to the garage, to make it possible to put the door inside. It needs a little bit of force and maneuvering to get them there, but afterwards it stays in place and don't fell out. 

The roof is sitting on walls low enough to prevent doors from sliding back to the very end of the garage (because the knob is not able to fit under the roof).

Additionally i made shorter version of the garage, which is enough for smaller cars (like hot wheels).

I printed it with PET-G.

Tags