Magnetic maintenance window for Ikea Lack enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These two modified Lack enclosure connectors allow you to remove the left window for maintenance.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 99
- Makes
- 0
- Views
- 1,944
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
These two modified Lack enclosure connectors allow you to remove the left window for maintenance.
Best used in combination with a 180° rotated or modified Einsy/Rambo case.
Only the two top parts are magnetic, the bottom connectors are the original ones from the enclosure. You can easily push out the window on the top edges and then pull it out.
Requirements:
- Ikea Lack enclosure (duh!)
- 4x Magnets 20mm x 6mm x 1,5mm (You can use the same type for the front doors of the Lack enclosure)
This is a remixed model from https://www.thingiverse.com/thing:2864118 as published in https://blog.prusaprinters.org/cheap-simple-3d-printer-enclosure/
Print instructions
Same settings as for the original enclosure parts.