Comandante Coffee grinder Espresso stepless Fine adjustment
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stepless fine adjustment for the comandante grinders.
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 65
- Makes
- 1
- Views
- 1,493
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Heyho
there are solutions out there for a better fine tuning of the comandante grinder.
But I didnt like all of them :D The mods for the existing Wheel arent that accurate and still not stepless and if you use a wing nut to secure a stepless system you cant put the grinder on the table any longer without the glass jar mounted.
So here is my Design. A stepless fine adjustment made out of 2 parts and you will need 1 - 2 M4 nuts.
Part 1:
"The fine adjuster" To dial in the needed coffee size. You can choose between a fully 3d Printed version with thread or a version for a M4 nut.
Part 2:
The "Lock knob" to secure the set adjustment.
I think the use and the assembly are kinda self explanatory.
The cut-out for the M4 nut is intentionally narrow so you don't have to glue anything. In case of difficulties, simply pull in with an M4 screw or heat the nut a little beforehand.
Have fun and keep printin! :D
If you like my work, I would be very happy about a small tip :)
https://www.paypal.com/paypalme/MeisterEdel
Update 30.11.2022
I added a Version for flat nuts :)