LED Bar for KP3S
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
LED Bar for KP3S
- Rating
- 5 / 5
- Likes
- 93
- Downloads
- 354
- Makes
- 14
- Views
- 2,777
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
LED bar for kingroon kp3s, in this case it is a 5v rgb bar but you could put a different type of led strip
I share the link to the led strip used. Its control is done by klipper
Barra led para la kingroon kp3s, en este caso he utilizado una barra led rgb a 5v. Se podría montar otro tipo de tira led.
Os comparto el link de los led que he utilizado. Las tiras led las estoy controlando con klipper
Other mods for Kingroon KP3s
############### LEDS ########
[neopixel Disco]
pin: PB2
# The pin connected to the neopixel. This parameter must be
# provided.
chain_count: 11
# The number of Neopixel chips that are "daisy chained" to the
# provided pin. The default is 1 (which indicates only a single
# Neopixel is connected to the pin).
##color_order: GRB
# Set the pixel order required by the LED hardware. Options are GRB,
# RGB, GRBW, or RGBW. The default is GRB. SET_LED LED=Disco RED=0.093 GREEN=0.051 BLUE=0.093
initial_RED: 0.25
initial_GREEN: 0.25
initial_BLUE: 0.25
# Sets the initial LED color of the Neopixel. Each value should be
# between 0.0 and 1.0. The WHITE option is only available on RGBW
# LEDs. The default for each color is 0