OctPrint Camera Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the bracket that supports the camera for octprint.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 19
- Makes
- 0
- Views
- 278
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
I used a 3D printer to make a bracket that supports the camera and a case that holds the electronic circuit board.
I used a Raspberry Pi Zero 2 W for the OctPrint computer. The method of attachment to the main unit is as follows. https://www.printables.com/model/338953/edit
The camera uses SUNNY Raspberry Pi Camera Rev1.3. Bought from Aliexpress for 4$.
The cable that connects the Raspberry Pi Zero 2 W and the camera is I used FFC ribbon cable. 30 cm long. That length covers the entire Z axis. I bought it from aliexpress for 2$.
I used PETG filament. No raft, no brim, no support.