Dental splint case with magnet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple case with magnetic closing mechanism for a dental splint/bite-guard.
- Rating
- 5 / 5
- Likes
- 39
- Downloads
- 164
- Makes
- 1
- Views
- 1,243
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Made a simple case with magnetic closing mechanism for a dental splint/bite-guard. Inside heightspace is 16mm. I used a large paperclip as a hinge connector, just bend it straight and push it in. Stop the print at 9.80mm height and insert the magnets in the right direction, additionally use some superglue to keep them in place.
DON'T use the “fix STL through the Netfabb” function in PrusaSlicer. It will fill the magnet inserts.
Used magnet: Ø8x4mm
Used paperclip: Ø1.1x65mm
Prusament PLA Opal Green
Nozzle: 0.4mm
Layer height: 0.15mm
If you have any questions just ask and let me know what you think!
Happy printing (: