1 / 8
Forced Air Deflector for Tukkari Prusa Enclosure — image 1
1 / 8

Forced Air Deflector for Tukkari Prusa Enclosure

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Made to improve forced airflow to power supply unit after I added a 2 inch tall concrete slab into enclosure.

Rating
0 / 5
Likes
3
Downloads
15
Makes
0
Views
402
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

After adding a 2" tall concrete block to reduce vibration while printing (which works great BTW), my printer sat higher than before. Due to this, the power supply unit (PSU) was above the cut out of my Tukkari enclosure, and some cool air from my fan was getting towards the bed. This also was not optimal cooling for PSU.

So, I created this part with a 60 degree angle to redirect any air with the potential to escape into the bottom of the PSU. I immediately noticed a difference in the temp sensor I have attached to the PSU.

The forced air from my larger fan moved the part a bit, so I added some double-sided tape to the bottom and after that it was good to go!

Tags