Raspberry Pi 3 toolless clip-on case Prusa i3 MK3/S
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a modification of the Raspberry Pi sleeve case by Tobias Christensen.
- Rating
- 4.875 / 5
- Likes
- 62
- Downloads
- 337
- Makes
- 8
- Views
- 2,769
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
This is a modification of the Raspberry Pi sleeve case by Tobias Christensen. It has a clip attachment that allows you to attach it to a 30mm v-slot aluminum extrusion such as on the Prusa i3 MK3/S.
Since it's a sleeve case and just clipped on to the extrusion, it allows you to toollessly attach the Raspberry Pi to the printer.
It doesn't attach super-easily, but with some wiggling it still works. You can remove the case from the extrusion again by pressing down the handle-ish thing and twisting the case.
I used it to connect Octoprint on my Pi 3 to the printer via USB and with a separate power source, since I use a smart plug to turn the printer on and off.
Caveat: This apparently collides with the MK3's sled's U-bolt depending on where you want to install it. See the pictures and the comments for details.
Created in Tinkercad: https://www.tinkercad.com/things/9EsTE742qKi
Print instructions
Print with the smaller sides sitting on the print surface.
I used support blockers for the smaller vents, but made sure supports were used with the HDMI and Micro USB ports.
I used PETG with a 0.3mm layer height on a 0.4mm nozzle and it worked fine. I think other materials and layer heights should work as well though.