1 / 4
Sovol SV06 Top Z bearings
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A top Z plates mod for the SOVOL SV-06 to add 608ZZ bearings. Can be used with or without bearings. Please read bellow..
- Rating
- 4.5 / 5
- Likes
- 148
- Downloads
- 765
- Makes
- 14
- Views
- 6,460
- Reviews
- 12
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
Made from scratch, just few additions to the original to make it easier to print with ASA, ABS… and with bearing of course. Added clearence for the rod hole to prevent pushing down your motor mount when tightened
2 models :
- Standard
- With holes (to allow Z lead screw disassembly without removing the top plates)
Print settings :
- 0.2 layer height
- Layer width .45 for .4 nozzle and 4 perimeters
- Layer width .65 for .6 nozzle and 3 perimeters
- 6 top / 5 bottom layers min
- Infill 20% min (gyroid, honeycomb)
Before using this part, you have to perfectly square your printer to ensure proper rotation of the Z lead screws or you will have Z wobble artefacts on your prints :
- Z frame axis square with bottom frame
- Z motors mounts square with Z frame (stock it wasn't in my case)
- Z frame L&R, Z lead screws L&R, Z rods L&R are parallel