1 / 2
i3 Mk2/2.5 Rear Plug PSU Cover
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Covers the standard i3 Mk2/2.5 PSU cover to rear facing using a handy combo socket.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 43
- Makes
- 0
- Views
- 363
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
PSU cover intended for use with THIS COMBO PLUG. This eliminates all the extra wires needed for the stock power switch.
Printed out of PETG at 0.3mm, 20% infill.
Use an M3 x 3 x 5 heat set insert in the hole above the plug. Secure the plug with an M3 screw using this insert.
Once the plug is installed, use a pair of flush cutters to trim the excess overhang of the plug bezel.