N+1 Modular Wire Spool Dispensers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
--V1.2-- Added _TS for those who wants to print without corner brims and smaller spindle to accommodate wire spools…
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 43
- Makes
- 0
- Views
- 438
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
--V1.2--
Added _TS for those who wants to print without corner brims and smaller spindle to accommodate wire spools with smaller internal diameter.
--V1.1--
Adjusted fittings of conical ends to the spindle.
--V1--
Too many wire spools, needed a way to organise and label them. Plus I wanted to try out some fitting techniques.
All the parts snap/slide fit together.
--Open to suggestions!--
Print instructions
Optimised
0.3mm layer height, 4 top and bottom layers
2/3 Shell, 5% infill
Support from built plate only, enable bridging.
Brim not recommended
~85g of PLA used
or whatever settings you are comfortable with