1 / 1
Cisco SG300 Series Switch 28x28mm Rack Ears — image 1

Cisco SG300 Series Switch 28x28mm Rack Ears

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a rack ear meant for a Cisco SG300 series switch. The bolt pattern is 20-28mm squared (20,24,28 steps).

Rating
5 / 5
Likes
6
Downloads
172
Makes
1
Views
820
Reviews
1

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution

This is a rack ear meant for a Cisco SG300 series switch, specifically the SG350XG. The bolt pattern is 20-28mm squared (20,24,28 steps) so it's a bit more universal. I'll be posting a very similar one as a universal rack ear that's not as long as this Cisco one. 

You can use either countersunk or non-countersunk (Pan head) M4 machine screws with this design. The mounting holes for a server rack are meant for M6 machine screws but you can go a bit larger or smaller.

Print Settings:

Note: This should be almost solid, bump up the wall thickness before the infill so it's stronger.

Material: PETG (VoxelPLA Pro eventually failed after 3 years)

Walls: 3mm+

Top/Bottom: 2mm+

Infill: 40%+ (Make your walls + Top/Bottom thicker first)

Update 9-19-25:

After 3 years the ones I printed with Grey VoxelPLA Pro failed for my heavier Cisco 10G switch. Upon inspection, I should have made the walls nearly solid and used PETG from the start. Use PETG and make the walls nearly solid. I always leave a little bit of space in case it overextrudes a little bit it can go inside the model and not force out through the top layer or walls.

 

Tags