[OpenSCAD] Parametric Beoplay H7/H9/H9i/H9-3G ear pad adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pad adapter that allows you to use any pair of earpads instead of the original ones. Experiment or Replace on the cheap.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 38
- Makes
- 1
- Views
- 380
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Share Alike
You can customize the size of the ear pad adapter. You probably just want to change the diameter of the adapter. The actual pad itself either gets stretched over the adapter or stuck with glue, depending on what exactly what pad you have.
It's intended to print with the pad size ( the flat ) facing down and with no supports. You mount it to the headphones the same way you would mount the original pads - using the original socket.
It's worked reasonably well for me..
It might appear too thick and heavy, reason for this is insufficient noise isolation using a thinner construction. Also Aesthetics..
